Skip to content

Global Research, Reputation and Rankings Office

What are you looking for?

Acıbadem University main site

Test & analysis catalogue (ACUTAB)

The ACU Test and Analysis Unit (ACUTAB) carries out research and analysis to national and international standards for researchers at the university and in industry. The list below reproduces the published test list by laboratory; application forms for each service are on the ACUTAB pages of the university site, and prices are set after the application is reviewed.

Overview

How to apply: complete and sign the request form for the test and send it to acutab@acibadem.edu.tr. Once the request is evaluated and approved, the full fee is deposited to the specified bank account and the receipt is forwarded; samples are delivered in the quantity and packaging specified, with a label carrying the information requested in the report. Fees exclude 20% VAT and may change without notice, but no increase applies during a project period once the fee is transferred. A single report is issued per application unless separate reports are requested; a second-language report carries an additional fee; returned samples are shipped receiver-pays.

Cell Culture Laboratory

No Service
1 Cell expansion and maintenance (25 cm² flask)
2 Cell expansion and maintenance (75 cm² flask)
3 Cell freezing (3×10⁶ cells/ml)
4 Mycoplasma testing of cell-culture samples by PCR
5 Mycoplasma testing of cell-culture samples with the MycoTOOL PCR detection kit

Molecular Biology Laboratory

No Service
DNA ISOLATION
1 Isolation from mammalian cells
2 Genomic DNA isolation from microorganisms
3 Plasmid DNA isolation from microorganisms
4 DNA isolation from agarose gel
DNA QUANTIFICATION
1 Imaging by agarose gel electrophoresis
2 DNA quantity and purity measurement
CLONING AND GENETIC MODIFICATION
1 PCR amplification
2 Site-directed mutagenesis (SDM), deletion, insertion
3 Gene synthesis / cloning 1
4 Gene synthesis / cloning 2
RNA WORK
1 RNA quantity and purity measurement
2 RNA isolation from mammalian cells
GENE EXPRESSION ANALYSIS
1 RNA isolation from tissue or cells
2 RNA isolation from tissue or cells
3 RNA isolation from tissue or cells
4 cDNA synthesis
5 cDNA synthesis
6 cDNA synthesis
Flow cytometry analyses
1 Measurement of mitochondrial function
2 CD surface antigen staining
INFLAMMASOME STIMULATION
1 Cell freezing (10×10⁶ cells/ml)
2 Functional analyses and immunological studies
INTERFERON GENE EXPRESSION ANALYSIS
1 RNA isolation from tissue or cells (1–5 samples)
2 RNA isolation from tissue or cells (6–20 samples)
3 RNA isolation from tissue or cells (>20 samples)
4 cDNA synthesis (1–5 samples)
5 cDNA synthesis (6–20 samples)
6 cDNA synthesis (>20 samples)
7 Real-time PCR (qPCR) (1–5 samples)
8 Real-time PCR (qPCR) (6–20 samples)
9 Real-time PCR (qPCR) (>20 samples)

Microbiology Laboratory

No Service
1 AMES mutagenicity test
2 AMES mutagenicity test kit production
3 Minimum bactericidal concentration
4 Minimum inhibitory concentration
5 Disinfectant efficacy test
6 Air-cleaning device efficacy test
7 Efficacy test of UV sterilisation devices
8 Genomic DNA isolation from microorganisms
9 Plasmid DNA isolation from microorganisms
10 Antibacterial activity on non-porous surfaces (ISO 22196)

Electrophoresis and Western Blot Laboratory

No Service
PROTEIN ELECTROPHORESIS
SDS-polyacrylamide (Laemmli type)
1 9 samples + marker (Coomassie blue)
2 9 samples + marker (silver staining)
MEMBRANE TRANSFER OF PROTEINS AND ENZYMATIC DETECTION
1 Semi-dry electrophoretic transfer (PVDF, nitrocellulose, nylon membrane), 9 samples + marker
2 Wet transfer, 9 samples + marker

In Vitro Biocompatibility Laboratory

No Service
1 Cytotoxicity test (ISO 10993-5, biocompatibility testing of medical devices, cosmetics and drugs)
2 Ocular irritation test – EpiOcular™ (OECD TG 492)
3 Skin irritation test – in vitro EpiDerm™ (OECD TG 439)
4 Skin corrosion test – in vitro EpiDerm™ (OECD TG 431)
5 Haemocompatibility test (ISO 10993-4)

Bioproduction Laboratory

No Service
1 Cloning (Escherichia coli, Pichia pastoris and others)
2 Recombinant protein production in yeast
3 Protein purification (Ni-NTA / ion-exchange chromatography)
4 Cellulase activity assays (colorimetric, fluorometric)
5 Cutinase / esterase activity assays (colorimetric, fluorometric)
6 Directed mutagenesis
7 Rational protein design
8 Bradford protein assay
9 BCA protein assay
10 Cytotoxicity tests (HepG2 cell line, WST-8)
11 Antimicrobial activity assay (E. coli, S. aureus, P. aeruginosa, C. albicans and others)
12 Enzymatic biodegradation tests

Microscopy Laboratory

No Service
1 Tissue processing and paraffin embedding
2 Decalcification
3 Microtome sectioning
4 Frozen sectioning (fresh, unfixed tissue only)
5 Haematoxylin–eosin and other special stains
6 Immunohistochemistry
7 Histomorphometric analysis and reporting
8 Histological and histopathological analysis and reporting
Confocal microscopy analyses
1 2D imaging
2 3D imaging (z-stacking)

Nanobiotechnology Laboratory

No Service
1 Solid-phase peptide synthesis
2 Dielectric constant of solid dielectric materials (ASTM D150)
3 Discussion and consultancy on projects involving computational protein and peptide structure analysis
4 Literature and database search for projects involving computational protein and peptide structure analysis
6 Zetasizer nano-scale particle sizing
7 Zetasizer zeta potential measurement

Chromatography and Spectroscopy Laboratory

No Service
UV-Vis spectrometry analyses
1 UV-Vis absorbance measurement (at a given wavelength)
2 UV-Vis spectrum acquisition (over a wavelength range)
3 Quantitative analysis – standard curve
4 Quantitative analysis – sample analysis
5 Kinetic analysis
6 Interpretation of results and reporting
Nuclear magnetic resonance (NMR) spectroscopy analyses
1 1H
2 13C (1 hour)
3 IVDr analysis (serum, plasma, urine, cerebrospinal fluid)
4 2D-COSY, HMBC, HSQC, TOCSY (1 hour)
5 APT, DEPT
LC-MS analyses
1 Sample dissolution / preparation
2 C18-column purity determination
3 C18-column mass analysis
4 Azo dye analysis
* Prices are for a single-run analysis and include the mobile phase.
LC-MS/MS analyses
1 Sample dissolution / preparation
2 Qualitative analysis
Range scan by MS2 scan
Target-ion search by MS2 SIM
3 Quantitative analysis
MRM method development
Preparation of standard samples
Calibration curve preparation
Quantitative analysis calculations
* Prices are for a single-run analysis and include the mobile phase.
Gas chromatography analyses
1 GC-MS analysis*
2 GC-FID analysis*
* Pricing varies with the reference substance needed and the number of repeats.
HPTLC analyses
1 HPTLC analysis
* Pricing varies with the reference substance needed and the number of repeats.
Preparative HPLC analyses
1 Sample dissolution / preparation
2 C18-column purification
3 Silica-column purification
4 Analytical method development
5 Sample drying (rotary evaporator)
6 Sample drying (desiccator)
* Prices are for a single-run analysis and include the mobile phase.
* Prices apply when the user supplies the columns; columns supplied by us are charged in addition.

Biomaterials Laboratory

No Service
Spectrophotometer
1 ATR – FTIR
Surface modification and analysis
1 Goniometer / contact angle
2 O₂ plasma
Particle characterisation
1 Particle size
2 Zeta potential
Mechanical testing
1 Tensile test
2 Compression test
Mechanical test outputs
1 Ultimate Tensile Strength (UTS)
2 Young's Modulus (E)
3 Compressive Stress (σ)
4 Compressive Modulus (E)
5 Elongation at Break (ɛ)

Medical Device Testing Laboratory

No Service
Consultancy service
1 Medical Device Regulation (MDR)
2 Product classification and rationale
3 List of international standards applicable to the device
4 Medical-device risk analysis report (to ISO 14971)
5 Medical-device usability report (to EN 62366)
6 Preparation of product technical specifications
7 Sterilisation methods and validation
8 Biocompatibility test reports (to ISO 10993)
9 Product verification and test reports to the product standard
10 Clinical evaluation and reporting
11 Medical-device validation
TESTS PERFORMED
1 Oro-nasal CPAP/BPAP masks EN 17510:2020
2 Nasal CPAP/BPAP masks EN 17510:2020
3 Catheter mount BS 7143:1989
4 Extendable patient circuit (breathing tubes) EN ISO 18562-2:2017
5 Breathing exerciser (three-ball)
6 CPAP device EN ISO 80601-2-70:2020; EN ISO 17510-1:2009
7 Nebuliser tubing and connector EN ISO 13544-2:2009
8 Corrugated patient circuit (breathing tubes) EN ISO 18562-2:2017
9 Nebuliser EN ISO 27427:2020
10 LED phototherapy EN ISO 60601-2-50:2009
11 TENS EN 60601-2-10:2015
12 Nebuliser EN ISO 13544-1:2009
13 Heating blanket TS EN 60601-2-35:2009
14 Clean-room measurements EN ISO 14644-1
15 Steam steriliser EN ISO 17665-1:2006; EN 285; EN 554
16 Transport ventilator TS EN 794-3:1999
17 Nebuliser ISO 18562 EN ISO 18562-1/2/3/4

Pharmaceutical Chemistry and Drug Metabolism Laboratory

No Service
1 In vitro drug metabolite determination
2 Mass-spectrum analysis of organic drugs
3 Synthesis of organic drugs and metabolites

Pharmacology and Toxicology Laboratory

No Service
1 Cytotoxicity test (ISO 10993-5, biocompatibility testing of medical devices, cosmetics and drugs)
2 Cytotoxicity test (MTT assay, target-organ-specific cell line)
3 Cytotoxicity test (neutral red uptake assay, target-organ-specific cell line)
4 Cytotoxicity test (LDH assay, target-organ-specific cell line)
5 Ocular irritation test – EpiOcular™ (OECD TG 492)*
6 Skin irritation test – in vitro EpiDerm™ (OECD TG 439)*
7 Skin corrosion test – in vitro EpiDerm™ (OECD TG 431)*
* For irritation and corrosion tests, running more than the standard six samples at once is not recommended; larger sets need a separate schedule and budget.

Pharmaceutical Technology and Cosmetology Laboratory

No Service
1 Dynamic light scattering (DLS) – Zetasizer (particle size and size distribution, nano scale)
2 Dynamic light scattering (DLS) – Zetasizer (zeta potential)
3 Static light scattering (SLS) – Mastersizer (micron-scale particle size, wet or dry)
4 Elek testi 1 kg'a kadar
5 pH measurement (electrometric method)
6 Climatic test chamber (product stability and shelf-life determination)
7 Rheometer / viscometer (viscosity measurement)
8 Rheometer / viscometer (frequency sweep)
9 Rheometer / viscometer (strain sweep)
10 Rheometer / viscometer (temperature sweep, −40 °C to 200 °C)
11 Spray drying
12 Spectrophotometric measurements: per reading (UV-Vis)
13 Spectrophotometric measurements: with calibration, package (UV-Vis)
14 Sample preparation for spectrophotometric measurement (UV-Vis)
15 Microscopic imaging and photography (including fluorescent materials)
16 Powder / granule coating (fluidised bed)
17 Dissolution test – tablet
18 Dissolution test – capsule
19 Disintegration test – tablet
20 Disintegration test – capsule
21 Disintegration test – suppository
22 Hardness test (tablet)
23 Friability – tablet
24 Texture analysis CT3 (for the pharmaceutical, food-supplement and cosmetic industries: adhesiveness, elasticity, hardness, spreadability)
25 Tablet formulation and stability studies
26 Tablet stability studies
27 Capsule formulation and stability studies
28 Capsule stability studies
29 Liquid (solution, suspension, syrup) formulation and stability studies
30 Liquid (solution, suspension, syrup) stability studies
31 Cosmetic product formulation and stability studies
32 Cosmetic product stability studies
33 Cosmetic product challenge test
34 Hair combing
35 Hair breakage
36 Hair long-term use
37 Novel carrier-system formulations (liposomes, micro/nano carriers)
38 Topical product efficacy in vitro (Franz cell) tests

Pharmacognosy and Phytotherapy Laboratory

No Service
1 HPTLC analysis*
2 GC-MS and GC-FID analysis*
3 Total phenolic content assay
4 Total flavonoid content assay
5 Total antioxidant activity assay (TOAC)
6 Ferric reducing antioxidant power assay (FRAP)
7 Cupric reducing antioxidant capacity assay (CUPRAC)
8 DPPH free-radical scavenging assay
9 DMPD free-radical scavenging assay
10 Elastase inhibition assay
11 Collagenase inhibition assay
12 Hyaluronidase inhibition assay
13 Tyrosinase inhibition assay
14 Urease inhibition assay
15 Acetylcholinesterase inhibition assay
16 Butyrylcholinesterase inhibition assay
17 Optical rotation test
18 Refractive index test
19 Relative density test
20 Acid value test
* Pricing varies with the reference substance needed and the number of repeats.

Pharmaceutical Microbiology Laboratory

No Service
1 EN ISO 11737 Microbiological evaluation of medical devices (sterility test, bioburden test)
2 BS ISO 22196 Measurement of antibacterial activity on plastics and other non-porous surfaces
3 BS ISO 4768 Measurement of anti-biofilm activity on plastics and other non-porous surfaces
4 TS EN ISO 22718 Cosmetics – Microbiology – Detection of Staphylococcus aureus
5 TS EN ISO 21150 Cosmetics – Microbiology – Detection of Escherichia coli
6 TS EN ISO 22717 Cosmetics – Microbiology – Detection of Pseudomonas aeruginosa
7 TS EN ISO 18416 Cosmetics – Microbiology – Detection of Candida albicans
8 TS EN ISO 21149 Cosmetics – Microbiology – Enumeration and detection of aerobic mesophilic bacteria
9 TS EN ISO 16212 Cosmetics – Microbiology – Enumeration of yeast and mould
10 TS EN ISO 11930 Cosmetics – Microbiology – Evaluation of the antimicrobial protection of a cosmetic product
11 Sterility test (European Pharmacopoeia 2.6.1)
12 Microbiological examination of non-sterile products (EP 2.6.12 / 2.6.13)
13 Bacterial endotoxin test (European Pharmacopoeia 2.6.14)
14 Bactericidal activity of disinfectants and antiseptics (TS EN 1276)
15 Fungicidal activity of disinfectants and antiseptics (TS EN 1650)
16 Antibacterial activity of plant or chemical substances (disk diffusion, minimum inhibitory concentration, minimum bactericidal concentration)
17 Antifungal activity of plant or chemical substances (disk diffusion, minimum inhibitory concentration, minimum fungicidal concentration)

In Vivo Biocompatibility Laboratory

No Service
1 Systemic toxicity test ISO 10993-11
2 Implantation test ISO 10993-6
3 Pyrogenicity test ISO 10993-11
4 Irritation test ISO 10993-23

Biochemistry Laboratory

No Service
1 Albumin (ALB), alanine aminotransferase (ALT), ammonia (NH3), aspartate aminotransferase (AST), gamma-glutamyl transferase (GGT), glucose (GLU), creatinine (CREA), cholesterol (CHOL), total protein (TP), triglyceride (TRIG), urea (BUN), uric acid (URIC)
2 Alkaline phosphatase (ALKP), amylase (AMYL), inorganic phosphate (PHOS), calcium (Ca), creatine kinase (CK), lactate (LAC), lactate dehydrogenase (LDH), lipase 2 (LIPA), magnesium (MG), total bilirubin (TBIL)

In Vivo Imaging Laboratory

No Service
1 2D fluorescence / bioluminescence imaging
2 High-sensitivity 2D and 3D in vivo fluorescence and bioluminescence imaging
3 Cerenkov imaging
* +50 TL per additional animal in a single imaging session

Electron Microscopy Laboratory

No Service
SCANNING ELECTRON MICROSCOPY ANALYSES
1 SEM sample sputter coating
2 SEM examination, high vacuum
3 SEM examination, low vacuum
4 SEM-EDS analysis
5 SEM tissue processing
6 SEM critical-point drying
7 Reporting service
TRANSMISSION ELECTRON MICROSCOPY ANALYSES
1 TEM tissue processing, standard methods
2 Semi-thin sectioning on the ultramicrotome
3 Thin sectioning on the ultramicrotome
4 Contrast staining
5 Microscopic examination
6 Reporting service

Biodesign Center

No Service
1 Design verification
2 Human-factors analysis
3 Risk analysis
4 UX/UI, system and product design analysis

Biobank Unit

No Service
1 DNA isolation
2 RNA isolation
3 Serum isolation
4 Plasma isolation
5 Cell viability measurements
6 DNA/RNA purity and concentration analysis (NanoDrop)
7 DNA/RNA integrity analysis (Qubit)
8 Detailed DNA/RNA integrity analysis (Bioanalyzer)
9 White-cell isolation from blood
10 Protein concentration measurement (NanoDrop, Qubit)
11 Agarose gel electrophoresis
12 Snap-freezing of tissue in liquid nitrogen
13 Snap-freezing of tissue in isopentane (2-methylbutane) and liquid nitrogen
Biobanking service
1 Request to store biological samples
2 Request to use biological samples